blog

Lar

blog

  • SSBR vs. ESBR: Key Differences in Filler Interaction and Rubber Performance
    Nov 17, 2026
    1. What Are SSBR and ESBR? Styrene-Butadiene Rubber (SBR) is a synthetic rubber widely used in tire manufacturing and other rubber products. Based on the polymerization process, SBR is mainly divided into two types: Solution Styrene-Butadiene Rubber (SSBR) and Emulsion Styrene-Butadiene Rubber (ESBR). Although both contain styrene and butadiene units, their production processes result in differences in molecular structure, microstructure, and performance. SSBR is produced through solution polymerization, commonly using an organolithium initiator. This process allows better control over polymer composition, molecular architecture, and the distribution of styrene and butadiene units. Vinyl content and molecular design can also be adjusted to meet different performance requirements. ESBR is manufactured through emulsion polymerization, in which styrene and butadiene are polymerized in an aqueous medium. It is an established production route with mature manufacturing technology and a wide range of commercial grades. Its polymer microstructure is generally less independently adjustable than that of SSBR.   2. SSBR vs. ESBR: Key Performance Differences The performance of SSBR and ESBR depends not only on the polymer itself but also on the filler system, formulation, and processing conditions. The following data compare the two rubbers in silica-filled and carbon-black-filled compounds. 2.1 Mechanical Properties The table below presents the mechanical properties of the four tested formulations. Vulcanizate Property SSBR + Silica ESBR + Silica SSBR + Carbon Black ESBR + Carbon Black Hardness (Shore A) 67 68 72 73 100% Modulus (MPa) 2.2 1.7 2.7 2.5 300% Modulus (MPa) 14.6 10.1 10.5 11.2 Tensile Strength (MPa) 28.2 18.4 19.5 22.2 Elongation at Break (%) 494 478 683 584 Permanent Deformation (%) 14 16 12 16 Tear Strength (kN/m) 56 51 58 55 Note: Results are derived from specific experimental formulations and should not be regarded as universal specifications for commercial grades. Key observations from the mechanical testing: In silica-filled compounds: SSBR exhibits significantly higher tensile strength (28.2 MPa vs. 18.4 MPa), 300% modulus, elongation at break, and tear strength compared to ESBR. In carbon-black-filled compounds: ESBR shows higher tensile strength and 300% modulus, whereas SSBR demonstrates higher elongation at break and tear strength. Hardness: The differences in hardness between SSBR and ESBR are relatively minor across both filler systems. These findings demonstrate that the mechanical performance of SBR is closely tied to the filler system, and neither rubber type universally outperforms the other in every property.   2.2 Dynamic Mechanical Properties Dynamic mechanical properties are important for evaluating the behavior of rubber compounds under repeated deformation. Tan δ is commonly used as an indicator when assessing tire-related properties: values at around 0°C are often associated with wet-grip behavior, while values around 60°C are commonly used to evaluate hysteresis related to rolling resistance. Property SSBR + Silica ESBR + Silica SSBR + Carbon Black ESBR + Carbon Black Tan δ at 0°C 0.282 0.275 0.350 0.360 Tan δ at 60°C 0.141 0.138 0.276 0.288 Wet Skid Factor 0.56 0.47 0.44 0.44 Key observations from dynamic testing: In the silica-filled system: SSBR records slightly higher tan δ values at both 0 ℃ and 60℃ than ESBR, while achieving a notably higher wet skid factor (0.56 vs. 0.47). In the carbon-black-filled system: SSBR shows lower tan δ values at both temperatures, while the wet skid factors for both compounds are identical at 0.44. These results highlight that dynamic performance is heavily influenced by polymer-filler interactions, proving that polymer type alone cannot dictate final compound behavior.   3. How to Choose Between SSBR and ESBR? SSBR and ESBR serve different formulation requirements. The appropriate choice depends on the target properties, filler system, processing conditions, and overall production costs. SSBR may be considered when: More precise control over polymer microstructure and molecular design is required. The formulation uses silica as a reinforcing filler and requires careful optimization of the rubber–silica interaction. A balance of wet-grip-related properties, hysteresis, and mechanical performance is important. ESBR may be considered when: A mature and widely established SBR production route is preferred. The formulation requires a suitable balance of mechanical properties and processing characteristics. Cost efficiency and the availability of established commercial grades are important selection factors.   Website: www.elephchem.com whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com
    CONSULTE MAIS INFORMAÇÃO
1 2 18 19 20 21 22 23 24 25 26 27
Um total de 27Páginas
Deixe um recado

Lar

Produtos

Whatsapp

Contate-nos