EVA Adhesive

Lar

EVA Adhesive

  • Application of EVA hot melt adhesive
    Nov 10, 2021
    Hot melt adhesive is solvent-free, almost odorless, pollution-free, and easy to apply, so it is widely used in many fields. Hot melt adhesive with ethylene-vinyl acetate random copolymer (EVA) as the base resin is one of the most important varieties of hot melt adhesive, which can be used in packaging materials, book binding, wood processing and other industries.   The development of EVA hot melt adhesive in my country began in the early 1970s. In the 1980s, due to the rapid development of related industries and industries such as printing, food and beverage, wood processing, and electronics, various production lines were introduced to stimulate the rapid growth of new product development and production capacity of EVA hot melt adhesive. EVA hot melt adhesive is mainly used in the following fields in my country.   1 Book binding EVA hot melt adhesive is used for wireless binding, which changes the cumbersome processes of threading round backs, gluing, and covering the cover used in the past for binding books with latex, greatly shortening the book publishing cycle and improving work efficiency and book binding quality. 2 Wood processing In wood processing, EVA hot melt adhesive is mainly used in combination with panel furniture edge banding machines for furniture edge banding, which has changed the backward appearance of manual operation in the past, and is easy to fold and assemble, which improves labor efficiency. 3. Clothing lining EVA and EVAL powders are inexpensive and have good adhesion. They are suitable for various coating processes such as powder coating, powder dot coating, and slurry coating. The hot melt lining made of EVA hot melt adhesive can make the clothing beautiful, crisp, non-deformed, and low-cost. 4 Packaging The bonding ability of EVA hot melt adhesive is relatively stable, not affected by changes in temperature and humidity in the working environment, and eliminates the inherent gluing and peeling problems of packaging machinery. Therefore, EVA hot melt adhesive can be used in the packaging industry in the fields of cardboard and cardboard boxes, cement bags, labeling, food packaging, protective packaging, and packaging container sealing.   EVA hot melt adhesive is also used in the manufacture of electrical appliances such as televisions, air conditioners, refrigerators, as well as the shoemaking industry, PET blow molding bottles, cigarette filter winding, outer packaging tear strips, cable joint sealing, oil pipeline anti-corrosion and other fields.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com   ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.
    CONSULTE MAIS INFORMAÇÃO
  • Introduction to EVA hot melt adhesive
    Nov 05, 2021
    EVA hot melt adhesive is a solvent-free, water-free, 100% solid fusible polymer. It is solid at room temperature and becomes a liquid adhesive that can flow and has a certain viscosity when heated and melted to a certain degree. It is light brown translucent or white after melting.   EVA hot melt adhesive is mainly made of the following four components: base resin, namely EVA resin, tackifying resin, wax, antioxidant, and a small amount of filler can be added in some occasions to increase the gap filling and reduce costs.   EVA hot melt adhesive has the following characteristics: (1). It has fast curing, low pollution, strong adhesion, and the adhesive layer has certain flexibility, hardness, and toughness; (2). After the adhesive liquid is applied to the adherend and cooled and solidified, the adhesive layer can be heated and melted again to become an adhesive body and then bonded to the adherend, with a certain degree of re-adhesion; (3). When using, just heat and melt the hot melt adhesive into the required liquid state and apply it to the adherend. After pressing, the bonding and curing can be completed within a few seconds, and the hardening, cooling and drying can be achieved within a few minutes.   The type of EVA determines the cohesive strength, flexibility, adhesion to the substrate and processability of the hot melt adhesive. For hot melt adhesive, the following properties of EVA should be paid attention to: molecular weight and its distribution, vinyl acetate (VA) content, crystallinity, softening point, melting point, melt index (MI) and melt viscosity, etc., because these properties directly affect the various properties of hot melt adhesive.   As the melt index of EVA increases, its strength, hardness, softening point and viscosity all decrease regularly; and the more VA content in EVA, the greater the elongation at break and the lower the hardness. In addition, when the VA content exceeds 30%, although the adhesion to polar and various non-porous non-polar substrates is improved, this EVA polymer is incompatible with wax, which is a point to be noted when designing hot melt adhesive formulas. In a formula, it is often necessary to use EVA with different MI or EVA with different VA content to obtain satisfactory comprehensive performance.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.
    CONSULTE MAIS INFORMAÇÃO

Deixe um recado

Deixe um recado
Se você estiver interessado em nossos produtos e quiser saber mais detalhes, deixe uma mensagem aqui, responderemos o mais breve possível.
enviar

Lar

Produtos

Whatsapp

Contate-nos